NON FERROUS GROUP
- Releasing Agents And Lubricants For High Pressure Casting Machines
- Tablets (Alloying Additives)
- Casting Additives
- Crucibles
- Pure Metals
- Master Alloys
- Silicon Nitride (Si3N4) Thermocouple Protection Sheaths
- Silicon Carbide (SiC) Thermocouple Protection Sheaths
- Heating Elements in Silicon Carbide (SiC)
- Ceramic Foam Filters
- Ceramic Pressed Filters
- Degassing & Slagging-Off Systems and Equipment
- Brass And Steel Air Vents
- Blasting & Consumables
- Lining Systems for Aluminum & Copper Foundries
Master Alloys
Aluminum Titanium Boron
| ALLOY | COMPOSITION | SHAPE | APPLICATION |
| AlTiB 5/1 | Ti % 5 – B % 1 / Al % rest | Stick / Coil | Grain Refiner for Aluminum Alloys |
| AlTiB 5/0,2 | Ti % 5 – B % 0,2 / Al % rest | Stick / Coil | Grain Refiner for Aluminum Alloys |
Aluminum Strontium
| ALLOY | COMPOSITION | SHAPE | APPLICATION |
| AlSr 15 | Sr % 15 / Al % rest | Stick | Modification for Al Si Alloys |
| AlSr 10 | Sr % 10 / Al % rest | Stick | Modification for Al Si Alloys |
Grinding Instruments for Copper Alloys
Copper-phosphorus
| ALLOY | COMPOSITION | SHAPE | APPLICATION |
| CuP 15 | P % 15 / Cu % the rest | Waffle Plate | *Deoxidation of copper and copper alloys.
*Phophorus treatment of hypereutectic AlSi *Increasing the fluidity of copper alloys such |
| CuP 8 | P % 8 / Cu % the rest | Shot |
Grain Refining Tube
| Various Copper Alloys Classifications |
Dosage | Prospective Results | Additional Instructions |
||
| Grain Refinement | Deoxidation | Reducing Casting temperature |
|||
| Yellow Brass | 250 gr/ton | Yes | Yes | Yes | Grain refining takes place in the range of 57-63% copper content. Optimum grain refining occurs when copper content is 59.5% and aluminum content is 0.6%. |
| %17 Zn,%6 Sn, %2 Al,
(Mn,Ni,Fe,Si,Pb )< % 0,5 |
|||||
| Leaded Brass | 250 gr/ton | Yes | Yes | Yes | |
| %17 Zn,%6 Sn, %2 Al,
(Mn,Ni,Fe,Si,Pb )˃ % 0,5 |
|||||
Grain Refiner for Copper and Copper alloys will show you the following advantages;
Lowering the pouring temperature, better formfilling and castability, eliminate defect in casting like shrinkage, hot-teearing and stress cracking, improvement of polishing quality and material distribution.
Packaging : it is supplied 50 grams capsules.
